cExpress-AL

cExpress-AL

COM Express Compact Size Type 6 Module Intel Atom® E3900 series, Pentium®, and Celeron® SoC (formerly Apollo Lake)

Key Features
  • Intel Atom® E3900 series (formerly Apollo Lake) and Pentium®/Celeron® SOC, supporting full virtualization (VT-d/VT-x)
  • Supports IEEE 1588 Precision Time Protocol (PTP)
  • Up to 8GB dual-channel non-ECC DDR3L at 1867/1600 MHz
  • Two DDI channels, one LVDS (VGA/eDP by build option), support up to 3 independent displays
  • Up to five PCIe x1 Gen2 (by PCIe bridge IC, build option)
  • Two SATA 6 Gb/s, three USB 3.0/2.0, five USB 2.0 a

    DATA SHEET

The cExpress-AL is a COM Express® COM.0 R3.0 Type 6 module supporting the Intel Atom® processor, Intel® Pentium® processor, and Intel® Celeron® processor system-on-chip (SoC). The cExpress-AL is specifically designed for customers who need optimized processing and graphics performance with low power consumption in a long product life solution.

The Intel Atom® processor, Intel® Pentium® processor, and Intel® Celeron® processor support non-ECC type DDR3L dual-channel memory at 1600/1867 MHz to provide excellent overall performance. Integrated IntelR Gen9 LP Graphics includes features such as OpenGL 4.3, DirectX 12, OpenCL 2.0; and support for H.265/HEVC, H.264, MPEG2, VC1, VP9, MVC, JPEG/MJPEG hardware decode. Up to three independent displays are available from DDI ports supporting HDMI/DVI/DisplayPort, optional VGA, single/dual-channel 18/24-bit LVDS, and optional eDP.

The cExpress-AL is specifically designed for customers with balanced performance/power consumption requirements who want to outsource the custom core logic of their systems for reduced development time. The cExpress-AL has dual stacked SODIMM sockets for up to 8 GB non-ECC type DDR3L memory. Featured IO includes a single Gigabit Ethernet port, USB 3.0 ports and USB 2.0 ports, SATA 6 Gb/s ports, and up to 5 PCIe x1 lanes. In addition, SD signals are muxed with GPIO. Support is provided for SMBus and I2C. The module is equipped with SPI AMI EFI BIOS, supporting embedded features such as a remote console, CMOS backup, hardware monitor, and watchdog timer. An optional eMMC 5.0 (8/16/32 GB) is supported.

SEMA

At the heart of SEMA is the Board Management Controller (BMC) supporting SEMA functions. The SEMA Extended EAPI provides access to all functions and can be integrated into the user’s own applications. The SEMA GUI and SEMA Command Line Interface allow monitoring, control, and use of the SEMA parameters and functions directly on your device for test and demonstration purposes. Optionally SEMA supports also remote procedure calls – please refer to SEMA Software Installation Guide.

Detailed forensic information is available after system or module failures. The BMC Power-Up Error Log function provides detailed information about the history of failures that may have occurred during power-up sequences. Log information includes e.g. error number, flags, restart event, power cycles, boot count, status, CPU temperature, and board temperature. Moreover minimum and maximum temperature of the CPU and system is available, as well as HDD S.M.A.R.T information- all of which can be used to analyze system or module failure in detail.

SEMA is available for Linux and Windows operating systems and for various HW platforms

Ordering Information

  • cExpress-AL-N3350 -:
    Compact COM Express Type 6 with Intel® Celeron® N3350 (2C)
  • cExpress-AL-E3930 -:
    Compact COM Express Type6 with Intel Atom® E3930 (2C)
  • cExpress-AL-E3940 -:
    Compact COM Express Type6 with Intel Atom® E3940 (4C)
  • cExpress-AL-E3950 -:
    Compact COM Express Type6 with Intel Atom® E3950 (4C)
  • cExpress-AL-N4200 -:
    Compact COM Express Type6 with Intel® Pentium® N4200 (4C)
    Accessory –
  • HTS-cAL-B-I -: Heatspreader for cExpress-AL Atom with threaded standoffs for bottom mounting
  • HTS-cAL-BT-I -: Heatspreader for cExpress-AL Atom with through hole standoffs for top mounting
  • HTS-cAL-B -: Heatspreader for cExpress-AL Pentium/Celeron with threaded standoffs for bottom mounting
  • HTS-cAL-BT -: Heatspreader for cExpress-AL Pentium/Celeron with through hole standoffs for top mounting
  • THS-cAL-B-I -: Low profile heatsink for cExpress-AL Atom with threaded standoffs for bottom mounting
  • THS-cAL-BT-I -: Low profile heatsink for cExpress-AL Atom with through hole standoffs for top mounting
  • THS-cAL-B -: Low profile heatsink for cExpress-AL Pentium/Celeron with threaded standoffs for bottom mounting
  • THS-cAL-BT -: Low profile heatsink for cExpress-AL Pentium/Celeron with through hole standoffs for top mounting
  • THSH-cAL-B-I -: High profile heatsink for cExpress-AL Atom with threaded standoffs for bottom mounting
  • THSH-cAL-B -: High profile heatsink for cExpress-AL Pentium/Celeron with threaded standoffs for bottom mounting
  • THSF-cAL-B-I -: High profile heatsink with fan for cExpress-AL Atom with threaded standoffs for bottom mounting
  • THSF-cAL-B -: High profile heatsink with fan for cExpress-AL Pentium/Celeron with threaded standoffs for bottom mounting
    Starter Kit –
  • COM Express Type 6 Starter Kit Plus -: COM Express Type 6 Starter Kit Plus
Customer reviews
  • 0
    0 ratings
  • 5 Stars
    0%
    4 Stars
    0%
    3 Stars
    0%
    2 Stars
    0%
    1 Star
    0%
Reviews

There are no reviews yet.

Write a customer review

Be the first to review “cExpress-AL”

TOP

X
Techsquare

Techsquare

Typically replies within an hour

I will be back soon

Techsquare
Welcome to Techsquare. We are happy to tell you about our product. Let me know if you've any questions.
WhatsApp