The CMx-BTx is a PC/104-based, Single Board Computer (SBC), fully compliant with the PCI-104 Specification, Version 1.1, and partially compliant with the PC/104 Specification, Version 2.6. PC/104 SBCs are very compact and highly integrated computers. This SBC features the 22nm, Intel® Bay Trail SoC. The board provides a DDR3L SO-DIMM socket, a PC/104 connector, a PCI-104 connector, three USB 2.0 ports, up to two Gigabit Ethernet ports, up to two SATA 3 Gb/s ports, one dedicated HD-Audio panel connector, one VGA port, one LVDS port, up to four COM ports, one mini-PCIe slot (with one USB 2.0 port included). The CMx-BTx can be run with only 5 volts and is capable of running operating systems like DOS, Windows 7/8 in either 32-bit or 64-bit configuration, Linux, VxWorks, and others. Another feature included on the board is a fail-safe BIOS that enables the user to start the module even if the original BIOS is corrupted.
Extreme Rugged PCI-104 Single Board Computer with Intel® Atom™ Processor E3800 Series SOC
- Single, dual, or quad-core Intel® Atom™ or Celeron® Processors
- Up to 4GB DDR3L at 1333MHz
- Supports VGA and LVDS
- GbE, 1x SATA 3Gb/s
- 3x USB 2.0, 8x GPIO
- Extreme Rugged™ operating temperature: -40°C +85°C
- Supports Smart Embedded Management Agent (SEMA) functions
At the heart of SEMA is the Board Management Controller (BMC) supporting SEMA functions. The SEMA Extended EAPI provides access to all functions and can be integrated into the user’s own applications. The SEMA GUI and SEMA Command Line Interface allow monitoring, control, and use of the SEMA parameters and functions directly on your device for test and demonstration purposes. Optionally SEMA supports also remote procedure calls – please refer to SEMA Software Installation Guide.
Detailed forensic information is available after system or module failures. The BMC Power-Up Error Log function provides detailed information about the history of failures that may have occurred during power-up sequences. Log information includes e.g. error number, flags, restart event, power cycles, boot count, status, CPU temperature, and board temperature. Moreover minimum and maximum temperature of the CPU and system is available, as well as HDD S.M.A.R.T information- all of which can be used to analyze system or module failure in detail.
SEMA is available for Linux and Windows operating systems and for various HW platforms
Our Rugged and Extreme Rugged products are developed using our Extreme Rugged Development Guidelines and Design Rules, and subjected to extensive voltage and temperature margin tests during the new product development process, in addition to Highly Accelerated Life Test (HALT) and shock and vibration testing. The ruggedness and reliability of the design are then validated using HALT, shock & vibration testing, and voltage margining. This thorough testing regimen allows us to verify that Tech Square products meet the stringent requirements demanded by our customers.
– Highly Accelerated Life Test
– Shock & Vibration
– Voltage and Temperature Margin Test
– Extended Temperature Testing
– Design Check
– Engineering Verification
– Pilot Run
– ETT Production Screening
– Conformal Coating
– Extended Life Cycle
CM3-BT1-E3815PCI-104, Atom E3815 (1C), 1.46 GHz, Single Core, incl. heat spreader, Standard operating temperature: 0°C to +60°C (ETT screening -40°C to 85°C)
DDR3L memoryVerified 2GB, 4GB DDR3L SODIMM memory available
CMx-BTx-X-10CMx-BTx cable kit
CMx-BTx-TM-10Passive low profile heatsink for CMx-BTx
CMx-BTx-TM-20Active low profile heatsink for CMx-BTx (with fan)