nanoX-AL

nanoX-AL

COM Express Mini Size Type 10 Module with Intel Atom® E3900 series, Pentium®, and Celeron® SoC (formerly codename: Apollo Lake)
Key Features
  • Intel Atom® E3900 Series, Pentium®, and Celeron® SoC
  • Up to 8GB, Dual Channel soldered non-ECC DDR3L at 1867/1600MHz
  • Newest Intel® Gen9 Low Power graphics, Up to 4k resolution, and H.265 codec
  • Multiple PCIe x1 Gen2 (configurable to x2, x4), GbE
  • Two SATA 6 Gb/s, two USB 3.0 and six USB 2.0, eMMC 5.0 (build option)
  • Supports Smart Embedded Management Agent (SEMA®) functions

    DATA SHEET

The nanoX-AL is a COM Express® COM.0 R3.0 Type 10 module supporting Intel Atom® processor E3900 series system-on-chip (SoC). The nanoX-AL is specifically designed for customers who need optimized processing and graphics performance with low power consumption in a long product life solution.

The nanoX-AL features the dual/quad core Intel Atom® processor E3900 series supporting non-ECC type DDR3L single-channel or dualchannel memory at 1600/1867 MHz to provide excellent overall performance. Integrated IntelR Gen9 LP Graphics includes features such as OpenGL 4.3, DirectX 12, OpenCL 2.0 and support for H.265/HEVC, H.264, MPEG2, VC1, VP9, MVC, JPEG/MJPEG hardware decode.

Graphics outputs include DDI ports supporting HDMI/DVI/DisplayPort and single-channel 18/24-bit LVDS (eDP by build option). The nanoXAL is specifically designed for customers with balanced performance and power consumption requirements who want to outsource the custom core logic of their systems for reduced development time.

The nanoX-AL has soldered type non-ECC DDR3L memory up to 8GB. In addition, onboard eMMC memory (8GB/16GB/32GB) and SD signals are available as build options. The nanoX-AL features a single onboard Gigabit Ethernet port, USB 3.0 ports, and USB 2.0 ports, and SATA 6 Gb/s ports. Support is provided for SMBus and I2C. The module is equipped with SPI AMI EFI BIOS, supporting embedded features such as remote console, CMOS backup, hardware monitor, and watchdog timer.

SEMA

At the heart of SEMA is the Board Management Controller (BMC) supporting SEMA functions. The SEMA Extended EAPI provides access to all functions and can be integrated into the user’s own applications. The SEMA GUI and SEMA Command Line Interface allow monitoring, control, and use of the SEMA parameters and functions directly on your device for test and demonstration purposes. Optionally SEMA supports also remote procedure calls – please refer to SEMA Software Installation Guide.

Detailed forensic information is available after system or module failures. The BMC Power-Up Error Log function provides detailed information about the history of failures that may have occurred during power-up sequences. Log information includes e.g. error number, flags, restart event, power cycles, boot count, status, CPU temperature, and board temperature. Moreover minimum and maximum temperature of the CPU and system is available, as well as HDD S.M.A.R.T information- all of which can be used to analyze system or module failure in detail.

SEMA is available for Linux and Windows operating systems and for various HW platforms

Ordering Information

  • nanoX-AL-E3950-2G -:
    Mini COM Express Type10 with Intel Atom® E3950 (4C), 2G memory
  • nanoX-AL-E3940-2G -:
    Mini COM Express Type10 with Intel Atom® E3940 (4C), 2G memory
  • nanoX-AL-E3930-2G -:
    Mini COM Express Type10 with Intel Atom® E3930 (2C), 2G memory
  • nanoX-AL-N4200-2G -:
    Mini COM Express Type10 with Intel® Pentium® N4200 (4C), 2G memory
  • nanoX-AL-N3350-2G -:
    Mini COM Express Type10 with Intel® Celeron® N3350 (2C), 2G memory
    Accessory –
  • HTS-nXAL-B-I -: Heatspreader for nanoX-AL Atom with threaded standoffs for bottom mounting
  • HTS-nXAL-B -: Heatspreader for nanoX-AL Pentium/Celeron with threaded standoffs for bottom mounting
  • HTS-nXAL-BT -: Heatspreader for nanoX-AL Pentium/Celeron with through hole standoffs for top mounting
  • HTS-nXAL-BT-I -: Heatspreader for nanoX-AL Atom with through hole standoffs for top mounting
  • THS-nXAL-B-I -: Low profile heatsink for nanoX-AL Atom with threaded standoffs for bottom mounting
  • THS-nXAL-BT-I -: Low profile heatsink for nanoX-AL Atom with through hole standoffs for top mounting
  • THS-nXAL-B -: Low profile heatsink for nanoX-AL Pentium/Celeron with threaded standoffs for bottom mounting
  • THS-nXAL-BT -: Low profile heatsink for nanoX-AL Pentium/Celeron with through hole standoffs for top mounting
  • THSH-nXAL-B-I -: High profile heatsink for nanoX-AL Atom with threaded standoffs for bottom mounting
    Starter Kit –
  • Starter Kit -: COM Express Type 10 Starter Kit Plus
Customer reviews
  • 0
    0 ratings
  • 5 Stars
    0%
    4 Stars
    0%
    3 Stars
    0%
    2 Stars
    0%
    1 Star
    0%
Reviews

There are no reviews yet.

Write a customer review

Be the first to review “nanoX-AL”

TOP

X
Techsquare

Techsquare

Typically replies within an hour

I will be back soon

Techsquare
Welcome to Techsquare. We are happy to tell you about our product. Let me know if you've any questions.
WhatsApp